Is Baking Soda and Vinegar the Solution to Unclog Your Drains?

Blocked drains are the most common plumbing nuisance that you can find in Sydney, yet it is the most troublesome out of all of them. Drains will forever be an integral part of your property that every property in Sydney should have. Plumbing system use these channels to transport water to where you need it to be around your property. When your drains function properly, it carries fresh water into your property and transports waste water out of your property. Without a proper functioning drain, water will not be able to get to where it is supposed to be. 

 

Blocked drains disrupts the flow of water inside your drains. The presence of a foreign object inside these channels Is usually the suspect behind blocked drains. These objects comes in various forms, which includes leaves, dirt, twigs, toiletries, grease, hair, and many more. These objects may be harmless at first, but the accumulation of these things will hinder the regular stream of water in your drains. Any blocked drain situation should be treated immediately. The wise choice is of course to grab your phone and reach out to your local plumbers in Sydney. However, word on the street is that blocked drains can be removed using a mixture of baking soda and vinegar. But how does it actually work?

If you’re up for an experiment and you don’t mind going through a few extra steps, you can try using a mixture of baking soda and vinegar to clear your blocked drains. Below we list down the steps for your blocked drain experiment:

1. Pour a pot of boiling hot water down the blocked drain. 
2. Pour 1 cup of baking soda, 1 cup of water, and 1 cup of vinegar.
3. Cover the drain and wait for about 10 minutes.
4. Finish by flushing the drain with boiling water again.

Baking soda is a base (sodium bicarbonate to be exact), while vinegar is an acid that is made up of water and acetic acid. When you combine the two, a chemical reaction will occur. The molecules between the two objects are exchanged, which will result in the creation of carbon dioxide and water that will bubble through the blockage. The reaction will break up the blockage, before moving the looser material down the drain. Carbon dioxide will also lower the pH of the water inside your drains, which makes It a relatively weak acid. 

In some cases, using a mixture of baking soda and vinegar might just actually work. However, it is important to note that, this is not the proper way as it might not necessarily work every time. It’s also important to note that if the source of your blocked drains is a damaged pipe, you should definitely not use this method as it could widen the area of damage. A damaged pipe should be replace or fix straight away, before any further problems can turn up. 

Pipe relining is the most safe and worthy solution to clear your blocked drains as it serves as a worthy alternative for pipe replacement. Pipe relining replaces your pipes from the inside; a liner will be inserted using a machine to your drains, which will then permanently fix itself to the surrounding structure. Additional features including a CCTV drain inspection and a hydro jet drain cleaning is generally available for you to use, depending on what plumbing services you choose to use. Instead of replacing your pipes or using a DIY solution to clear your blocked drains, you can reach out to your local plumbers in Sydney to get the proper pipe relining services to get your plumbing system up and running once again, without having to worry about any problems in the near future.